HP XP Скачать руководство пользователя страница 107

Страница: 107 / 148

Explanation

Could not use the specified P-VOL for making Business Copy.

Recommended action

•

(1) You may have specified a P-VOL which is not targeted for a backup. Specify the correct
P-VOL.

•

(2)The specified P-VOL may not be mapped to the VSS installation server (application
server). Map it using Storage Management Software.

•

(3) Using Storage Management Software, confirm the valid/invalid setting of the Business
Copy function. If it is invalid, change it to valid.

•

(4) An error occurred when an operation command was given to the disk array system.

See

“About errors attributable to disk array systems” (page 133)

E2002019

Message

S-Vol cannot be created for this volume. P-Vol is being formatted.

Explanation

Creation of S-VOL failed. P-VOL is being formatted.

Recommended action

Create the S-VOL after P-VOL formatting is complete.

E200201A

Message

Creation of S-Vol failed: The LU is already paired.

Explanation

Creation of S-VOL failed. The pair status of the LU is already PAIR

Recommended action

The pair status of the specified LU is already PAIR. Specify the correct LU and re-execute.

E200201B

Message

Operation Failed. message

Explanation

Operation Failed.

Recommended action

[XP P9500/XP7]

•

(1) If Host group: HP-VSS-HG does not exist, create HP-VSS-HG.

•

(2) Check that it does not come into conflict with the operational restrictions and points of
consideration when using RAID Manager. See Table 2.5.2-3.

•

(3) See the log file and provide solutions for any error messages were output.

Error messages

107

Содержание XP





















































































































































Результаты поиска

Содержание XP

Отзывы:

Похожие инструкции для XP

Бренды по названию

Популярные бренды

HP XP, Руководство пользователя

Результаты поиска

Содержание XP

Отзывы:

Похожие инструкции для XP

Бренды по названию

Популярные бренды