HP Visualize j6000, Дополнительное руководство

Страница: 22 / 148

22 Chapter 1
Product Information
Front Panel Components
CD ROM Drive (Optional)
As an optional component, the J6000 workstations support one slim-line CD ROM drive
with an ATAPI (IDE) interface.
Figure 1-4 shows the operating features of the CD ROM drive, and Table 1-3 describes
these features.
Figure 1-4. CD ROM Drive Features
Table 1-3. CD ROM Drive Features
Feature Purpose
Busy Indicator • Lights during a data access operation and during a data
transfer.
• Flashes at a one second rate when a disk is loaded.
• Continues to flash if a disk or hardware error is detected.
• Flashes at a three second rate while playing an audio disk.
Emergency
Eject Hole Opens the Disk Tray when the end of a paper clip is inserted
into it. Used when the workstation does not have power and
the Disk Tray cannot be opened by pressing the Eject Button.
Eject Button Opens the Disk Tray so that a CD ROM disk may be inserted
in it or removed from it. When the drive is in use, press the
Eject Button for more than one second to open the Disk Tray.
The Disk Tray does not open if the workstation power is off.
Disk Tray Holds the CD ROM disk. (Note that this style of CD ROM
drive does not use a disk caddy.)
Disk Tray
Eject Button
Busy Indicator
Light
Emergency Eject
Button