57
3 System Board
Memory Controller Hub (82850)
RIMM Memory Slots
The PC has four RIMM memory sockets, RIMM A1, RIMM A2, RIMM B1,
RIMM B2, for installing two or four RDRAM memory modules.
Each pair of memory sockets must contain identical memory modules
(identical in size, speed and type). That is, sockets
A1
and
B1
must contain
identical modules, and sockets
A2
and
B2
must contain either identical
modules or continuity modules.
If only two RDRAM modules are installed, use the sockets marked
A1
and
B1
. The other two sockets (
A2
and
B2
) must contain continuity modules.
Read/Write Buffers
The MCH defines a data buffering scheme to support the required level of
concurrent operations and provide adequate sustained bandwidth between
the RDRAM subsystem and all other system interfaces (CPU, AGP and PCI).
System Clocking
The MCH operates the System interface at 100 MHz, PCI at 33 MHz and AGP
at 66/133 MHz. Coupling between all interfaces and internal logic is done in
a synchronous manner. The clocking scheme uses an external clock
synthesizer (which produces reference clocks for the host, AGP and PCI
interfaces).
Содержание Vectra VL800
