HP Vectra VL800, Техническое справочное руководство

Страница: 75 / 147

75
3 System Board
Assigned Device Interrupts
Although the Setup program can be used to change some of the settings, the
following address map is not completely BIOS dependent, but is determined
partly by the operating system. Note that some of the interrupts are
allocated dynamically.
Interrupt Source
APIC Controller Interrupt Signalling on
of
device
Input (PIC mode)
Pentium 4
Bus
AGP: int A
Slot 1: int C
Slot 2: int A
Slot 3: int D
Slot 4: int C
Slot 5: int B ICH2 INTA INT Pentium 4
bus
instruction
AGP: int B
Slot 1: int D
Slot 2: int B
Slot 3: int A
Slot 4: int D
Slot 5: int C ICH2 INTB INT Pentium 4
bus
instruction
Slot 1: int A
Slot 2: int C
Slot 3: int B
Slot 4: int A
Slot 5: int D ICH2 INTC INT Pentium 4
bus
instruction
Slot 1: int B
Slot 2: int D
Slot 3: int C
Slot 4: int B
Slot 5: int A ICH2 INTD INT Pentium 4
bus
instruction
Device on Primary IDE Channel ICH2 IRQ14 INT Pentium 4
bus
instruction
Device on Secondary IDE Channel ICH2 IRQ15 INT Pentium 4
bus
instruction
Serial Interrupt from Super I/O ICH2 SERIRQ INT Pentium 4
bus
instruction