HP Vectra VL800, Техническое справочное руководство

Страница: 48 / 147

48
3 System Board
Accessory Board Slots
Accessory Board Slots
The following block diagram shows the position of the accessory board slots
on the system board.
AGP Slot
Minitower models of the HP Vectra VL800 are equipped with a single AGP
(Accelerated Graphics Port) graphics slot.
The 1.5V AGP slot provides the ultimate graphics performance for high-
end graphics cards, combining AGP 4X bandwidth (with data transfer rates
up to 1056 MB/s).
NOTE
AGP 3.3V graphics cards cannot be used
.
The 1.5V AGP slot is backwards compatible with both AGP 1x and 2x modes
(using 1.5 V signalling), and AGP 4x mode (where 1.5 V signalling is
required).
The AGP interface and bus are explained on page 54 .
PCI Slot 2
PCI Slot 1
PCI Slot 3
PCI Slot 4
One 1.5V AGP slot .
PCI Slot 5
Five 32-bit 33 MHz PCI slots