125
7 Tests and Error Messages
Test Sequence and Error Messages
Post Test Sequence and Post Error
In this phase, the PC waits for any error messages that the BIOS may issue.
If such an error occurs, then an error code is displayed on the monitor
screen.
The following diagrams show the different BIOS-generated errors.
Test
Beep Codes
Action to Take
Incompatible memory modules
3
•
Check that the memory modules are
of the same speed and type
•
Check that the RDRAM continuity
modules are installed
•
Check that the installed RDRAM
modules have the same speed ratings
•
Check that the memory modules are
correctly installed
Presence of continuity modules in the RIMM
sockets
Compatibility speed rating of installed RDRAM
modules
Compatibility of installed RDRAM modules
Presence of memory modules
Availability of video controller. It is checked by
the BIOS. If an error is detected, it is not a fatal
one and the BIOS will continue its execution
normally.
4
Check that the video controller is
correctly installed.
Note: No error is detected if a monitor is
not connected to an installed video
controller. This is not a fatal error and
the BIOS will continue its normal
execution.
Содержание Vectra VL800
