Installing and Configuring the Director 2/64
64
Director 2/64 Installation Guide
3. Attach the bracket with 10-32, flat-head Phillips screws (
4
) using the two
center threaded holes on the front side of the switch.
4. Repeat
step 2
and
step 3
for the second front mounting bracket.
Figure 22: Installing the rack mounting brackets on the switch
5. Locate the two rear mounting brackets in the shipping carton.
6. Position a rear mounting bracket (
3
) so that the bracket’s center holes (
1
)
line up with the 1st and 3rd threaded holes on the back portion of the switch
side.
Note:
The slotted end (
2
) of the bracket should face toward the back of the
switch.
7. Secure the rear mounting bracket to the switch using two 10-32, flat-head
Phillips screws.
8. Repeat
step 6
and
step 7
for the second rear mounting bracket.
