Installing and Configuring the Director 2/64
105
Director 2/64 Installation Guide
■
Tx Throughput—An alert will occur if the threshold set for transmit
throughput is reached.
■
Rx or Tx Throughput—An alert will occur if the threshold set for either
receive or transmit throughput is reached.
5. Click Next. A new screen displays with additional parameters, as shown in
Figure 49
. The name configured for the alert displays at the top of the screen.
Note:
Click Previous if you need to return to the previous screen.
Figure 49: New Threshold Alerts dialog box—second screen
6. Enter a percentage from 1 through 100 for % utilization. When throughput
reaches this percentage of port capacity, a threshold alert will occur.
7. Enter the amount of cumulative minutes in which the % utilization should
exist during the notification interval before an alert is generated. You can also
choose At any time if you want an alert to occur whenever the set %
utilization is reached. The valid range is from 1 to the interval value set in
step 8
.
8. Enter the interval in minutes in which throughput is measured and threshold
notifications can occur. The valid range is 5 minutes to 70,560 minutes.