Installing and Configuring the Director 2/64
84
Director 2/64 Installation Guide
3. Set director date and time manually, or set for periodic updates. For specific
instructions, see the following sections:
■
Set Director Date and Time
, page 83
■
Synchronize Date and Time
, page 85
Figure 39: Configure Date and Time dialog box
Set Date and Time Manually
Use these steps to set the director date and time manually:
1. At the Configure Date and Time dialog box, click the Periodic Date/Time
Synchronization check box to deselect the option (no check mark in the box).
The grayed-out Date and Time fields activate.
2. Click the Date fields that require change, and type numbers in the following
ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YYYY): greater than 1980
3. Click the Time fields that require change, and type numbers in the following
ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
4. Click Activate to set the director date and time, and close the Configure Date
and Time dialog box.