HP ProLiant DL370, Руководство пользователя

Страница: 69 / 153

Hardware options installation 69
6.
Remove the media bay blank (on page 27 ).
7.
Using a T-15 Torx screwdriver, remove the screws from the blank and install them on the device.
8.
Slide the media device part of the way into the bay.
9.
Connect the server data and power cables to the rear of the device.
10.
Slide the media drive fully into the bay until it is seated securely.
11.
Install the fan cage.
12.
Install the air baffle.
13.
Install the access panel.
14.
Do one of the following:
o
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
15.
Power up the server (on page 22 ).