HP ProLiant DL370 Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 153

background image

Configuration and utilities 105

For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or

the HP SIM website (

http://www.hp.com/go/hpsim

).

Management Agents

Management Agents provide the information to enable fault, performance, and configuration

management. The agents allow easy manageability of the server through HP SIM software, and third-
party SNMP management platforms. Management Agents are installed with every SmartStart assisted

installation or can be installed through the HP PSP. The Systems Management homepage provides status

and direct access to in-depth subsystem information by accessing data reported through the Management

Agents. For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation
Pack

or the HP website (

http://www.hp.com/servers/manage

).

HP ProLiant Essentials Virtualization Management Software

The ProLiant Essentials Virtual Machine Management Pack and ProLiant Essentials Server Migration Pack
plug-ins extend HP Systems Insight Manager capabilities to manage virtual machines.
The Virtual Machine Management Pack provides the following functionality:

•

Central management and control of VMware® and Microsoft® virtual machines with physical host to
virtual machine association

•

Easy identification of VMs or host servers reaching high CPU, memory, or disk utilization levels

•

Highly flexible move capabilities that enable live moves and moves to dissimilar host resources

•

Back up, template, and alternate host capabilities that enable restoration of VMs on any available

host

The Server Migration Pack automates the manual processes required for migrating servers between

physical or virtual platforms (P2V, V2P, and V2V), enabling easy migration to appropriate physical or

virtual platforms that meet performance and capacity requirements.
For more information about virtualization management software, see the HP website
(

http://www.hp.com/go/vmmanage

).

HP Insight Server Migration software for ProLiant

The HP Insight Server Migration software for ProLiant (SMP) enables administrators to upgrade or replace
an existing server through server migration. SMP provides an automated, accurate, and affordable

method of migrating existing servers and their content to the latest server technologies.
SMP automates the migration of the operating system, applications, and data from one server to another

without errors, eliminating the need for manual redeployment of these elements on the new server. During
the migration process, the software automatically loads new drivers, required for boot, on the destination

server. The wizard-based user interface simplifies the migration process and requires little experience or

training.
For more information about the SMP, see the HP website (

http://www.hp.com/go/migrate

).

«
...
103
104
105
106
107
...
»

Содержание ProLiant DL370


























































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL370

BladeCenter HS23

Бренд: IBM Страницы: 28

Бренд: IBM Страницы: 84

Бренд: IBM Страницы: 110

Бренд: Fujitsu Siemens Computers Страницы: 68

Бренд: MSI Страницы: 106

Бренд: MSI Страницы: 18

Бренд: IBM Страницы: 75

SuperServer 2029BT-HNC0R

Бренд: Supermicro Страницы: 148

RIP Station 5100

Бренд: Epson Страницы: 140

Sooloos Ensemble

Бренд: Meridian Страницы: 2

Бренд: National Instruments Страницы: 4

Бренд: Synology Страницы: 16

Бренд: Synology Страницы: 33

Бренд: Synology Страницы: 20

Бренд: Synology Страницы: 21

DiskStation DS411

Бренд: Synology Страницы: 22

Бренд: CNET Страницы: 14

Бренд: Alcatel-Lucent Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды