HP ProCurve 4104GL, Руководство по управлению и настройке

Страница: 390 / 504

14-40
HP Procurve Stack Management
Configuring Stack Management
Syntax:
no stack name <stack name>
stack join <mac-address>
If you don’t know the MAC address of the destination Commander, you can
use
show stack all to identify it.
For example, suppose you have a Series 4100GL switch operating as the
Commander for a temporary stack named “Test”. When it is time to eliminate
the temporary “Test” stack and convert the Series 4100GL switch into a
member of an existing stack named “Big_Waters”, you would execute the
following commands in the CLI of the Series 4100GL switch:
Figure 14-33. Example of Command Sequence for Converting a Commander to a Member
Using the CLI To Remove a Member from a Stack
You can remove a Member from a stack using the CLI of either the Commander
or the Member.
N o t e
When you remove a Member from a stack, the Member’s
Auto Join
parameter
is set to
No
.
Using the Commander CLI To Remove a Stack Member. This option
requires the switch number (SN) and the MAC address of the switch to
remove. (Because the Commander propagates its Manager password to all
stack members, knowing the Manager password is necessary only for gaining
access to the Commander.)
Eliminates the “Test” stack and converts
the Commander to a Candidate.
Helps you to identify the MAC address of the
Commander for the “Big_Waters” stack.
Adds the former “Test” Commander to the
“Big_Waters” stack.