HP ProCurve 4104GL, Руководство по управлению и настройке

Страница: 366 / 504

14-16
HP Procurve Stack Management
Configuring Stack Management
Figure 14-8. The Default Stack Configuration Screen
3. Move the cursor to the Stack State field by pressing
[E]
(for Edit ).
4. Do one of the following:
• To disable stacking on the Candidate, use the Space bar to select
the
Disabled option, then go to step 5.
Note: Using the menu interface to disable stacking on a Candidate
removes the Candidate from all stacking menus.
• To insert the Candidate into a specific Commander’s stack:
i. Use the space bar to select Member.
ii. Press
[Tab]
once to display the Commander MAC Address parameter,
then enter the MAC address of the desired Commander.
• To change
Auto Join
or
Transmission Interval
, use
[Tab]
to select the
desired parameter, and:
– To change Auto Join , use the Space bar.
– To change
Transmission Interval
, type in the new value in the range
of 1 to 300 seconds.
Note: All switches in the stack must be set to the same transmis-
sion interval to help ensure proper stacking operation. HP recom-
mends that you leave this parameter set to the default 60 seconds.
Then go to step 5.
5. press
[Enter]
to return the cursor to the Actions line.