HP OmniBook 6000 Скачать руководство пользователя страница 149

Страница: 149 / 207

Troubleshooting

Your

Computer

Troubleshooting

Techniques

Corporate Evaluator’s Guide 149

•

Test the audio with the DiagTools diagnostics. See “Testing the Hardware” on
page 169.

If you hear a loud high-pitched whine (feedback) from the speakers

•

In the Volume Control, try reducing the Master volume: double-click the speaker icon
in the taskbar.

•

In Volume Control, click Options, Properties, and select the microphone option for
the playback settings. Then in Volume Control, make sure the microphone is muted.

•

Avoid using the built-in microphone and built-in speaker at the same time.

CD-ROM and DVD Problems

If you can’t boot from a CD or DVD in the CD/DVD drive

•

Make sure the CD or DVD is bootable, such as the

Recovery CD

•

If you want the computer to boot from a CD or DVD whenever one is present, check
the boot order in the BIOS Setup utility:

1. Click Start, Shut Down, Restart.

2. When the HP logo appears, press F2 to enter BIOS Setup.

3. Open the Boot menu. The default boot order is (1) Removable Device, (2) Hard

Disk, and (3) CD-ROM/DVD Drive.

4. Select CD-ROM/DVD Drive for first boot device.

5. Press F10 to exit BIOS Setup.

•

Restart the computer: click Start, Shut Down, Restart.

•

Test the DVD drive with the DiagTools diagnostics. See “Testing the Hardware” on
page 169.

If a DVD plays erratically

•

Dirt or smudges can cause a disc to skip. Clean the disc with a soft cloth. If the disc is
badly scratched, it will probably have to be replaced.

Содержание OmniBook 6000
















































































































































































































Результаты поиска

Содержание OmniBook 6000

Отзывы:

Похожие инструкции для OmniBook 6000

Бренды по названию

Популярные бренды

HP OmniBook 6000, Руководство по оценке

Результаты поиска

Содержание OmniBook 6000

Отзывы:

Похожие инструкции для OmniBook 6000

Бренды по названию

Популярные бренды