HP OmniBook 6000 Скачать руководство пользователя страница 142

Страница: 142 / 207

Using Windows NT 4.0

Using the Docking Solutions

142 Corporate Evaluator’s Guide

•

For the undocked profile, click “The computer is undocked”. Click OK to close

the profile properties window.

5. Move the profile you wish to be the default to the top by clicking the side arrows.

6. Click OK to close the “System Properties” window.

7. Double-click the Devices icon in the Control Panel. You will need to disable the

appropriate devices in each hardware profile.

8. Locate device “Csa64xx” and click HW Profiles. This is the dock IDE driver, and

should be disabled in all undocked profiles. Highlight each undocked profile and click
Disable. Click OK to exit.

9. Locate device “Piixide” and click HW Profiles. This is the notebook IDE driver, and

should be disabled in all docked profiles. (The dock IDE driver will take over.)
Highlight each docked profile and click Disable. Click OK to exit.

10. Locate device Symc88xx and click HW Profiles. This is the dock SCSI driver, and

should be disabled in all undocked profiles. Highlight each undocked profile and click
Disable. Click OK to exit.

11. Click Close to close the Devices window.

You can now reboot your computer. At each reboot you will be prompted for the
appropriate profile to be used.

Содержание OmniBook 6000
















































































































































































































Результаты поиска

Содержание OmniBook 6000

Отзывы:

Похожие инструкции для OmniBook 6000

Бренды по названию

Популярные бренды

HP OmniBook 6000, Руководство по оценке

Результаты поиска

Содержание OmniBook 6000

Отзывы:

Похожие инструкции для OmniBook 6000

Бренды по названию

Популярные бренды