HP HPE ProLiant DL365 Gen10 Plus Server Скачать руководство пользователя страница 169

Страница: 169 / 223

Intelligent Provisioning

Intelligent Provisioning is a single-server deployment tool embedded in ProLiant servers and HPE Synergy compute modules. Intelligent

Provisioning simplifies server setup, providing a reliable and consistent way to deploy servers.

Intelligent Provisioning prepares the system for installing original, licensed vendor media and Hewlett Packard Enterprise-branded

versions of OS software. Intelligent Provisioning also prepares the system to integrate optimized server support software from the

Service Pack for ProLiant (SPP). SPP is a comprehensive systems software and firmware solution for ProLiant servers, server blades,

their enclosures, and HPE Synergy compute modules. These components are preloaded with a basic set of firmware and OS components

that are installed along with Intelligent Provisioning.

IMPORTANT:

HPE ProLiant XL servers do not support operating system installation with Intelligent Provisioning, but they do

support the maintenance features. For more information, see "Performing Maintenance" in the Intelligent Provisioning

user guide and online help.

After the server is running, you can update the firmware to install additional components. You can also update any components that

have been outdated since the server was manufactured.

To access Intelligent Provisioning:

Press F10 from the POST screen and enter either Intelligent Provisioning or HPE Rapid Setup Software.

From the iLO web interface using Lifecycle Management. Lifecycle Management allows you to access Intelligent Provisioning
without rebooting your server.

Intelligent Provisioning

169

Содержание HPE ProLiant DL365 Gen10 Plus Server
































































































































































































































Результаты поиска

Содержание HPE ProLiant DL365 Gen10 Plus Server

Отзывы:

Бренды по названию

Популярные бренды

HP HPE ProLiant DL365 Gen10 Plus Server, Руководство пользователя

Результаты поиска

Содержание HPE ProLiant DL365 Gen10 Plus Server

Отзывы:

Бренды по названию

Популярные бренды