HP HPE ProLiant DL365 Gen10 Plus Server, Руководство пользователя

Страница: 101 / 223

Installing a secondary low-profile PCIe slot riser cage option Installing a secondary low-profile PCIe slot riser cage option
When installed, this riser cage provides an additional low profile slot and supports half-length/half-height expansion boards.
Prerequisites Prerequisites
This option requires a dual processor configuration.
Before installing this option, be sure that you have the following:
The components included with the hardware option kit
Procedure Procedure
1. Observe the following alerts:
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
2. Back up all server data.
3. Power down the server (Power down the server).
4. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5. Do one of the following:
a. Extend the server from the rack ( Extend the server from the rack ).
b. Remove the server from the rack ( Remove the server from the rack ).
6. Remove the access panel ( Remove the access panel).
7. Install the secondary low-profile PCIe slot riser cage.
8. Install one of the following, as needed:
Expansion boards (Installing an expansion board in the secondary riser cage )
Controllers (Smart Array controller options )
Installing a secondary low-profile PCIe slot riser cage option 101