HP HPE ProLiant DL365 Gen10 Plus Server Скачать руководство пользователя

Страница: 128 / 223

Installing the Systems Insight Display power module

Prerequisites

Before installing this option, be sure you have the following:

The components included with the hardware option kit

T-10 Torx screwdriver

Procedure

1. Observe the following alerts:

WARNING:

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

CAUTION: To prevent damage to electrical components, properly ground the server before beginning any

installation procedure. Improper grounding can cause electrostatic discharge.

2. Back up all server data.

3. Power down the server (Power down the server).

4. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

5. Do one of the following:

a. Extend the server from the rack ( Extend the server from the rack ).

b. Remove the server from the rack ( Remove the server from the rack ).

6. Remove the access panel ( Remove the access panel).

7. Disconnect the Power/UID/USB cable from the front power button/USB 3.0 on the system board.

8. Using a Torx T-10 screwdriver, remove the Power/UID/USB assembly.

Installing the Systems Insight Display power module

128

Содержание HPE ProLiant DL365 Gen10 Plus Server
































































































































































































































Результаты поиска

Содержание HPE ProLiant DL365 Gen10 Plus Server

Отзывы:

Похожие инструкции для HPE ProLiant DL365 Gen10 Plus Server

Бренды по названию

Популярные бренды

HP HPE ProLiant DL365 Gen10 Plus Server, Руководство пользователя

Результаты поиска

Содержание HPE ProLiant DL365 Gen10 Plus Server

Отзывы:

Похожие инструкции для HPE ProLiant DL365 Gen10 Plus Server

Бренды по названию

Популярные бренды