HP hpe proliant dl20 gen9 Скачать руководство пользователя страница 16

Страница: 16 / 131

Component identification 16

Item LED

Status

Definition

Flashing green The drive is rebuilding or performing a RAID migration, strip size

migration, capacity expansion, or logical drive extension, or is

erasing.

Flashing

amber/green

The drive is a member of one or more logical drives and predicts

the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller.

The blue Locate LED is behind the release lever and is visible when illuminated.

IMPORTANT:

The Dynamic Smart Array B140i Controller is only available in UEFI Boot Mode.

It cannot be enabled in Legacy BIOS Boot Mode. If the B140i controller is disabled, drives

connected to the system board Mini-SAS connectors operate in AHCI or Legacy mode. Under

this condition:

•

The drives cannot be a part of a hardware RAID or a logical drive.

•

The Locate, Drive status, and Do not remove LEDs of the affected drives are disabled.

Use BIOS/Platform Configuration (RBSU) in the UEFI System Utilities ("

HPE UEFI System

Utilities

" on page

) to enable or disable the B140i controller (System Configuration

→

BIOS/Platform Configuration (RBSU)

→

System Options

→

SATA Controller Options

→

Embedded SATA Configuration).

Fan locations

Содержание hpe proliant dl20 gen9




































































































































Результаты поиска

Содержание hpe proliant dl20 gen9

Отзывы:

Похожие инструкции для hpe proliant dl20 gen9

Бренды по названию

Популярные бренды

HP hpe proliant dl20 gen9, Руководство пользователя

Результаты поиска

Содержание hpe proliant dl20 gen9

Отзывы:

Похожие инструкции для hpe proliant dl20 gen9

Бренды по названию

Популярные бренды