1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet or the Retail Jacket.
3.
Disconnect all external devices from the Retail Jacket.
4.
If installed, remove the tablet from the Retail Jacket (see
Top cap on page 63
).
Remove the battery:
1.
Loosen the 4 captive screws (1) that secure the battery to the Retail Jacket.
2.
Remove the battery (2) from the Retail Jacket.
Reverse this procedure to install the battery.
Front cover
Description
Spare part number
Front cover (includes bar code scanner lens and adhesive liner)
744030-001
Before removing the front cover, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet or the Retail Jacket.
3.
Disconnect all external devices from the Retail Jacket.
4.
Remove the top cap (see
Top cap on page 63
).
5.
If installed, remove the tablet from the Retail Jacket (see
Top cap on page 63
).
NOTE:
When replacing the front cover, be sure the following components are removed from the defective
front cover and installed on the replacement front cover:
●
Bar code scanner module (see
Bar code scanner module and Cable connector board on page 69
)
●
Card connector board (see
Bar code scanner module and Cable connector board on page 69
)
Retail Jacket component replacement procedures
65
