Navigating and selecting in Computer Setup
To navigate and select in Computer Setup, follow these steps:
1.
Shut down the tablet.
2.
To power on the tablet, press the Power button and Volume down button simultaneously.
The Startup menu is displayed.
3.
Press
f10
to enter Computer Setup.
●
Tap a menu or a menu item to select it.
●
To close open dialog boxes and return to the main Computer Setup screen, tap Escape, and then
follow the on-screen instructions.
4.
To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes
and Exit, and then follow the on-screen instructions.
5.
To save your changes and exit, select Main, select Save Changes and Exit, and then follow the on-
screen instructions.
Restoring factory settings in Computer Setup
NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Shut down the tablet.
2.
To power on the tablet, press the Power button and Volume down button simultaneously.
The Startup menu is displayed.
3.
Press
f10
to enter Computer Setup.
4.
Select Main, and then tap Restore Defaults.
5.
Follow the on-screen instructions.
6.
To save your changes and exit, select Save Changes and Exit, and then follow the on-
screen instructions.
Your changes go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory settings.
94
Chapter 8 Computer Setup and HP PC Hardware Diagnostics (UEFI – Windows 8
