background image

Speakers

Description

Spare part number

Speakers (include left and right speakers and cables)

747629-001

Before removing the speakers, follow these steps:

1.

Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and 
then shut it down through the operating system.

2.

Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.

Disconnect all external devices from the tablet.

4.

Remove the display assembly (see 

Display assembly on page 28

), and then remove the 

following components:

a.

NFC antenna (see 

NFC antenna on page 35

)

b.

WWAN module (see 

WWAN module on page 36

)

c.

Power button board (see 

Power button board on page 42

)

d.

Battery (see 

Battery on page 48

)

e.

System board (see 

System board on page 50

)

f.

Docking connector cable (see 

Docking connector cable on page 56

)

Remove the speakers:

1.

Release the tabs (1) built into the bottom cover that secure the speaker cable, and then release the 
speaker cable.

2.

Remove the four Phillips PM1.3×2.0 screws (2) that secure the speakers to the bottom cover.

62

Chapter 5   Removal and replacement procedures

Содержание ElitePad 1000 G2































































































































Отзывы: