System board
NOTE:
The system board spare part kit is equipped with an Intel Atom z3795 quad core 1.60-GHz processor
(burst up to 2.39-GHz; 2.0-MB L2 cache), 4096-MB of system memory, and includes the power button
actuator, processor, and replacement thermal material.
Description
Spare part number
Equipped with 128-GB eMMC storage, an NFC module, and the Windows 10 or Windows 8 Professional
operating system
824500-601
Equipped with 128-GB eMMC storage, an NFC module, and the Windows 10 or Windows Embedded
Industry 8.1 64-bit Retail Solutions operating system
824500-401
Equipped with 128-GB eMMC storage, an NFC module, and a non-Windows operating system
824500-001
Equipped with 128-GB eMMC storage and the Windows 10 or Windows 8 Professional operating system
829007-601
Equipped with 128-GB eMMC storage and a non-Windows operating system
829007-001
Equipped with 64-GB eMMC storage, an NFC module, and the Windows 10 or Windows 8 Professional
operating system
824499-601
Equipped with 64-GB eMMC storage, an NFC module, and the Windows 10 or Windows Embedded
Industry 8.1 64-bit Retail Solutions operating system
824499-401
Equipped with 64-GB eMMC storage, an NFC module, and a non-Windows operating system
824499-001
Equipped with 64-GB eMMC storage and the Windows 10 or Windows 8 Professional operating system
824501-601
Equipped with 64-GB eMMC storage and the Windows 10 or Windows Embedded Industry 8.1 64-bit
Retail Solutions operating system
824501-401
Equipped with 64-GB eMMC storage and a non-Windows operating system
824501-001
Before removing the system board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display assembly (see
Display assembly on page 28
), and then remove the
following components:
a.
NFC antenna (see
NFC antenna on page 35
)
b.
WWAN module (see
WWAN module on page 36
)
c.
Power button board (see
Power button board on page 42
)
d.
Battery (see
Battery on page 48
)
Remove the system board:
1.
Release the forward-facing webcam (1) from the molding built into the bottom cover.
2.
Disconnect the audio jack board cable (2) from the system board.
50
Chapter 5 Removal and replacement procedures
