HP E1563A, Руководство пользователя, Страница: 61 / 166

Digitizer Command Reference 61
reg_number Register Description (base + register offset)
2 Status/Control Register (base + 04
16
)
3 Offset Register (base + 06
16
)
6 Interrupt Control Register (base + 0C
16
)
14 Calibration Flash ROM Address Register (base + 1C
16
)
15 Calibration Flash ROM Data Register (base + 1E
16
)
16 Calibration Source Register (base + 20
16
)
18 Range, Filter, Connect Channels 1 and 2 Register (base + 24
16
)
19 Range, Filter, Connect Channels 3 and 4 Register (base + 26
16
)
20 Trigger/Interrupt Level Channel 1 Register (base + 28
16
)
21 Trigger/Interrupt Level Channel 2 Register (base + 2A
16
)
22 Trigger/Interrupt Level Channel 3 Register (base + 2C
16
)
23 Trigger/Interrupt Level Channel 4 Register (base + 2E
16
)
24 Sample Period High Word Register (base + 30
16
)
25 Sample Period Low Word Register (base + 32
16
)
26 Pre-Trigger Count High Register (base + 34
16
)
27 Pre-Trigger Count Low Register (base + 36
16
)
28 Post-Trigger Count High Register (base + 38
16
)
29 Post-Trigger Count Low Register (base + 3A
16
)
30 Trigger Control/Source Register (base + 3C
16
)
31 Sample Control/Source Register (base + 3E
16
)
•
Executable when initiated: No
•
Coupled Command: No
•
Reset (*RST) Condition: None
Example
Write to the Range, Filter, Connect Channels 1 and 2 register to set channel 1 and 2
ranges to 64V and set the filters to 100 kHz:
DIAG:POKE 18,13621
The binary bit pattern for +13621 is 0011010100110101
:SHORt
DIAGnostic:SHORt[<channel>] ON | 1 | OFF | 0 connects an internal short
across the input of the specified channel when the “ON” or “1” parameter is used.
The internal short is enabled by “ON” or “1” and disabled by “OFF” or “0”.
Comments
•
The short remains in effect until a reset or until it is disabled with a
DIAG:SHORt[<channel>] OFF command.
•
Executable when initiated: No
•
Coupled Command: No
•
Reset (*RST) Condition: Short OFF