HP Device Access Manager for HP ProtectTools Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 103

HP Device Access Manager for HP ProtectTools Скачать руководство пользователя страница 34

Setup procedures

Registering credentials

You can use the My Identity page to register your various authentication methods, or credentials. After
they have been registered, you can use these methods to log on to Security Manager.

Enrolling your fingerprints

If your computer has a fingerprint reader built in or connected, the HP ProtectTools Security Manager
Setup Wizard guides you through the process of setting up or “enrolling” your fingerprints.

1.

An outline of two hands is displayed. Fingers that are already enrolled are highlighted in green.
Click a finger on the outline.

NOTE:

To delete a previously enrolled fingerprint, click its finger.

2.

When you have selected a finger to enroll, you are prompted to scan the finger until its fingerprint
is successfully enrolled. An enrolled finger is highlighted in green on the outline.

3.

You must enroll at least two fingers; index or middle fingers are preferable. Repeat steps 1 to 3 for
another finger.

4.

Click

Next

, and then follow the instructions on the screen.

NOTE:

When enrolling fingerprints through the Getting Started process, fingerprint information is not

saved until you click

Next

. If you leave the computer inactive for a while, or close the program, the

changes you made are

not

saved.

Enrolling scenes

You must enroll one or more scenes in order to use face logon.

To enroll a new scene from the HP ProtectTools Security Manager Setup Wizard:

1.

Click the

HP ProtectTools Security Manager

icon in the sidebar at the right side of the screen.

2.

Enter your Windows® password, and then click

Next

.

3.

Under

Enable security features

, select the

Windows Logon Security

check box, and then click

Next

.

4.

Under

Choose your credentials

, select the

Face

check box, and then click

Next

.

5.

Click

Enroll a new scene

.

After you have enrolled successfully, you can also enroll a new scene if you have experienced difficulty
during logon because one or more of the following conditions have changed:

●

Your face has changed significantly since your last enrollment.

●

The lighting is quite different from any of your previous enrollments.

●

You were wearing glasses (or not) during your last enrollment.

26

Chapter 7 HP ProtectTools Security Manager

«
...
32
33
34
35
36
...
»

Содержание Device Access Manager for HP ProtectTools








































































































Отзывы:

Нет отзывов