HP Compaq Presario,Presario 2816 Скачать руководство пользователя страница 149

Страница: 149 / 217

Meaning

Option

The force option, this option is required and is used as
confirmation before resetting the virtual partition.

NOTE:

On Superdome 2, the force option is

mandatory.

-f

Specifies the nPar to which the target vPar belongs. This
option is mandatory for a command invoked from OA.

-N nparidentstr

If the command is invoked from the partition, it will reset
the vPar in that nPar. If the

–N

option is not specified.

nparidentstr

can be specified as an nPar name or

nPar number.

•

Access level/Bay level:

OA Administrator, OA Operator

•

Restriction:

You must be connected to the monarch OA.

VPARREMOVE

•

Command:

vparremove -p vparidentstr [-f] [-N nparidentstr] [-Z parspecname]

IMPORTANT:

The

-N

option is mandatory when the command is invoked from the OA. It

is optional when the command is invoked from the OS running on the nPar

•

Description:

Deletes a virtual partition previously created using the

vparcreate

command. All resources

associated with the virtual partition are made available for allocation to other partitions.

The options for the command:

Meaning

Option

Specifies the target virtual partition. The

vparidentstr

can be specified in ASCII format as a vPar number or

-p vparidentstr

a vPar name, or in the format

nparidentstr:vparidentstr

. When specified in

the format

nparidentstr:vparidentstr

nparidentstr

and

vparidentstr

can either be a

name or number.

NOTE:

When executed from the OA, the vPar should

be identified using the format

nparidentstr:vparidentstr

or used along with

the

–n

option.

The force option, this option is required and is used as
confirmation before removing the virtual partition.

-f

Specifies the parspec of the nPar in which the vPar is
to be removed. When this option is specified all other

-Z parspecname

command options are applied to the specified parspec
and not to any partition.

NOTE:

The

–n

and

–z

options are mutually exclusive.

Specifies the nPar to which the target vPar belongs. This
option is mandatory for a command invoked from OA.

-N nparidentstr

If the command is invoked from the partition, it will

VPARREMOVE

149

Содержание Compaq Presario,Presario 2816


























































































































































































































Результаты поиска

Содержание Compaq Presario,Presario 2816

Отзывы:

Похожие инструкции для Compaq Presario,Presario 2816

Бренды по названию

Популярные бренды

HP Compaq Presario,Presario 2816, Руководство пользователя

Результаты поиска

Содержание Compaq Presario,Presario 2816

Отзывы:

Похожие инструкции для Compaq Presario,Presario 2816

Бренды по названию

Популярные бренды