1 Accessing the CLI
Remotely accessing the Onboard Administrator
The Onboard Administrator CLI can be accessed remotely through any Telnet or Secure Shell
session.
Telnet session
1.
From a network-connected client, open a command-line window
2.
At the prompt, open a Telnet session to the IP address of the Onboard Administrator, and then
press
Enter
.
For example,
telnet 192.168.100.130
, where the IP address is the address of your
Onboard Administrator.
3.
Enter a valid user name, and then press
Enter
.
4.
Enter a valid password, and then press
Enter
. The CLI command prompt appears.
5.
Enter commands for the Onboard Administrator.
6.
To end the remote access Telnet session, enter
Exit
,
Logout
, or
Quit
at the CLI command
prompt.
Secure Shell session
1.
Using any Secure Shell client application, start a Secure Shell session to the Onboard
Administrator.
2.
When prompted, enter the assigned IP address or DNS name of the Onboard Administrator,
and then press
Enter
.
3.
Enter a valid user name, and then press
Enter
.
4.
Enter a valid password, and then press
Enter
. The CLI command prompt appears.
5.
Enter commands for the Onboard Administrator.
6.
To end the remote access Secure Shell session, close the communication software or enter
Exit
,
Logout
, or
Quit
at the CLI command prompt.
Locally accessing the Onboard Administrator
IMPORTANT:
Only use the serial port during the initial setup of the OA network. Disconnect after
setup and do not use the serial port as a console interface.
You can access the Onboard Administrator locally through a serial port connector on the rear of
the Onboard Administrator module during the initial set up of the OA network. Use a laptop or
desktop computer as a serial console to communicate with the Onboard Administrator. A laptop
or desktop connected to the Onboard Administrator serial port requires a null-modem cable. The
minimum connection to an external console is pins 2, 3, and 5.
Remotely accessing the Onboard Administrator
11
Содержание Compaq Presario,Presario 2816
Страница 107: ...Link 2 OK Link N FAILED IO Slots Status Bay Slot Status 1 1 OK 1 2 OK SHOW IOX STATUS 107 ...
Страница 118: ...Link 7 Unknown Link 8 Unknown 1 18 Interconnect management commands ...
Страница 127: ... Access level Bay level Operator or Admin Restriction You must be connected to the monarch OA ICAPMODIFY 127 ...
Страница 213: ...Xbar Crossbar XFM Xbar Fabric module XML Extensible markup language 213 ...