Customizing the Port Configuration
If the slot in which you installed the Switch 100VG Module was empty the
last time the switch was either rebooted or reset (or the power to the switch
was cycled), then the module will use preconfigured default parameter
values that will work for most networks.
The 100VG port default configuration is:
Enabled: Yes
Mode: Master (MAC)
Trunk (port trunking): None
Broadcast Limit: 0
If necessary, configure the port(s) in the module by using the switch console
interface. (See the
Console User’s Guide
shipped with the Switch 2000, and
the online Help provided in the console interface itself.)
If the default port configuration, shown above, is correct for your network,
then skip this process.
7
Содержание AdvanceStack 100VG
Страница 1: ...HP AdvanceStack Switch 100VG Module Installation Guide ...
Страница 6: ......
Страница 8: ......
Страница 25: ......