HP AdvanceStack 100VG, Руководство по установке

Страница: 18 / 26

5. Do one of the following:
•
If you will be installing another module in the slot, go to
‘‘Installing a Module in an Unused Slot’’ on page 2 and begin with
step 3.
Make sure that you install the proper LED label strip for the new
module you are installing, as described in step 1 on page 2. If you
do not install the correct LED label strip for the module you have
installed, the LED display will be incorrect for that module.
•
If you will not install another module in the slot (that is, you leave
it empty), then re-attach a slot cover plate over the empty slot
opening and replace the LED label strip for that slot with a blank
LED strip saved previously.
6. If you are removing a module, or replacing a module with a different
type (for example, replacing an Ethernet module with a 100VG
module), then reboot the switch as described under “Rebooting the
Switch” on page 8.
C a u t i o n
For proper cooling and reduction of electromagnetic emissions, ensure
that a slot cover (provided with your Switch 2000) is installed on any
unused port or transceiver slot.
10