HP 8167A, Руководство пользователя, Страница: 82 / 262

5
T able 5-4. Reset State (Default Setting)
P arameter Reset V alue
HP 8167A HP 8168D HP 8168E HP8168F
W avelength 1310nm 1540nm 1540nm 1540nm
df 0GHz
Display Mode nm
P ower minimum
*
P ower/Attenuation Mode P ower
Unit (P ower) W
Modulation Timing External
Modulation Status O
*
The minimum value is determined, individually for each instrument at calibration.
Example OUTPUT 724;"*RST"
*S A V
Syntax *SAV <wsp> <location>
1 location 5
Denition The instrument setting is stored in RAM. Y ou can store settings
in locations 1-5. The scope of the saved setting is identical with
the scope of the standard setting described in \*RST".
Example OUTPUT 724;"*SAV 3"
*SRE
Syntax *SRE <wsp> <value>
0 value 255
Denition The service request enable command sets bits in the service
request enable register that enable the corresponding status
byte register bits .
The register is cleared:
At power-on
By sending a value of zero .
The register is not changed by the *RST and *CLS commands .
5-12 Remote Commands