HP 8167A, Руководство пользователя, Страница: 106 / 262

5
:SYST em Commands
:SYST em:D A T e
Syntax :SYSTem:DATe <wsp> <value>, <value>, <value>
where
the rst value is the year (two or four digits),
the second value is the month, and
the third value is the day .
Description This command sets the date .
:SYST em:D A T e?
Syntax :SYSTem:DATe?
Description This query returns the current date in the format YY/MM/DD ,
where YY is the year , MM is the month, and DD is the day .
Example OUTPUT 724;":STAT:DAT 93,3,15"
:SYST em:ERRor?
Syntax :SYSTem:ERRor?
Description This query returns the next error from the error queue (see
\The Error Queue " in Chapter 4). Each error has the error code
and a short description of the error , separated by a comma, for
example 0, "No error" . Error codes are numbers in the range
-32768 and +32767. Negative error numbers are dened by the
SCPI standard. P ositive error numbers are device dependent.
The errors are listed in Appendix F
Example OUTPUT 724;":SYST:ERR?"
ENTER 724;A$
5-36 Remote Commands