HP 8167A, Руководство пользователя, Страница: 101 / 262

5
:ST A Tus:OPERation:ENABle
Syntax :STATus:OPERation:ENABle <wsp> <value>
Description This command sets the bits in the ENABle register that
enable the contents of the EVENt register to aect the Status
Byte (STB). Setting a bit in this register to 1 enables the
corresponding bit in the EVENt register to aect bit 7 of the
Status Byte .
:ST A Tus:OPERation:ENABle?
Syntax :STATus:OPERation:ENABle?
Description This query returns the current contents of the
OPERation:ENABle register .
Example OUTPUT 724;":STAT:OPER:ENAB 768"
OUTPUT 724;":STAT:OPER:ENAB?"
ENTER 724;A$
:ST A Tus:OPERation[:EVENt]?
Syntax :STATus:OPERation [:EVENt]?
Description This query reads the contents of the OPERation:EVENt register .
Only two bits of the event register are used (whether these
bits contain information depends on the transition register
conguration):
Bit 8, which can reect the excessive state (when the output
power that you set exceeds what the laser is capable of
producing).
Bit 9, which can reect the initializing state (the instrument is
performing its power-up initialization).
Example OUTPUT 724;":STAT:OPER:PTR 768"
OUTPUT 724;":STAT:OPER:COND?"
ENTER 724;A$
Remote Commands 5-31