HP 8167A, Руководство пользователя, Страница: 60 / 262

3
Press the
NNNNNNNNNNNNNNNNN
Start softkey . The message Running is ashed in the Display
window . The Display also shows the estimated time before realignment is
complete . The extreme right softkey oers you the chance to abort, and may be
pressed at any time .
Figure 3-7. A uto Realignment
After realignment, one of the following messages appears in the Display
window:
Abort by user { you have pressed the
NNNNNNNNNNNNNNNNN
Abort softkey during realignment. The
laser cavity has not been realigned.
A power down interrupted Auto Realignment at a critical moment {
A utomatic Realignment has been interrupted by a power down. The laser cavity
has not been realigned. Continue by pressing the
NNNNNNNNNNNNNNNNNNNNNNN
Realign or
NNNNNNNNNNNNNN
Exit softkey .
Realignment OK { the laser cavity has been realigned successfully with laser
protection occurring for at most 1 wavelength point over the tuning range .
No improvement { the laser cavity has been realigned, but laser protection has
occurred for more than 1 wavelength point over the tuning range . It is still safe
to continue .
Realignment impossible, contact service { the laser cavity cannot
be realigned because of a serious error . This error is unlikely to be directly
concerned with realignment. Contact service and do not continue .
Not allowed during stabilizing { you tried to
NNNNNNNNNNNNNNNNN
Start an operation while
stabilizing when the working temperature is too low . Please wait until it has
stabilized. See \Stabilizing" in Appendix A for more information.
Stabilizing occurred try again later { the instrument has resumed
stabilizing. Realignment is not possible at present.
3-8 Other Functions