![background image](http://html.mh-extra.com/html/hp/635n/635n_administrators-manual_163680122.webp)
Resetting to Factory Defaults
Parameters on the HP Jetdirect print server (for example, the IP address) can be reset to factory
default values using the following procedures:
CAUTION
A Jetdirect X.509 certificate will be saved over a cold reset to factory default
values. However, a Certificate Authority (CA) certificate installed to validate a network
authentication server will not be saved.
■
HP LaserJet Printer with Internal EIO Print Server
In most cases, the HP Jetdirect internal print server can be reset to factory defaults when a cold-
reset is performed on the printer.
CAUTION
Be sure to print a Jetdirect configuration page before performing a cold reset.
Resetting the printer will clear all data from the printer memory and reset all printer
settings, including network configurations, to their factory default values. After a cold
reset, users may be affected due to changes in user-specified printer settings. Network
systems may lose their connection to the printer.
NOTE
The
Restore Factory Settings
menu item in the printer control panel menu will
not reset the HP Jetdirect print server.
■
For older HP LaserJet printers, a cold-reset is performed by power cycling the printer while
pressing the
Go
,
Start
, or
Pause/Resume
button.
■
For recent LaserJet printers and MFPs, use the printer's Service menu accessed during the
initial power-on sequence. See
Service Menu Example
.
■
For other printers, refer to your printer manuals. Or, visit
http://www.hp.com/go/support
and
search for document file bpj02300.html.
NOTE
After a cold reset, print a Jetdirect configuration page to confirm that factory-reset
values have been assigned.
Service Menu Example
To perform a cold reset on many recent HP LaserJet printers and MFPs:
1
Turn the printer on and watch for the memory count to begin.
2
Press and hold the
Select
button (or the “6” button on MFPs with numeric keypads only) until
the three control panel lights (
Ready
,
Data
,
Attention
) blink and then remain on.
3
Release the
Select
button (or “6” button). The control panel will display
Select Language
.
4
Press the down arrow
M
button (or “9” button) until
Cold Reset
appears.
5
Press the
Select
button (or “6” button) to perform a cold reset and then continue its power-on
sequence.
112
Chapter 7 Troubleshooting the HP Jetdirect Print Server
ENWW
Содержание 635n
