![background image](http://html.mh-extra.com/html/hp/635n/635n_administrators-manual_163680125.webp)
Check the following items if the configuration page does not print.
1
Did you perform the correct steps on the printer to print the configuration page?
The steps required to print a configuration page vary between different printers and print servers.
See the documentation supplied with your print server.
For EIO print servers, a Jetdirect page typically prints along with the printer configuration page.
Use the printer control panel menus.
2
Is there a print job in process?
You cannot print an HP Jetdirect configuration page to the printer while a print job is in process.
Wait until the print job is complete, then print the configuration page.
3
Does an error message appear on the printer control panel display?
●
See Procedure 3 in this section for a list of network-related error messages and corrective
actions.
●
See your printer documentation for a complete list of control panel messages and corrective
actions.
Procedure 3: Resolving Printer Display Error Messages
Check the following information to resolve network-related error messages that appear on the printer
control panel display.
This information assumes you have already printed a configuration page
.
1
For LaserJet printers or MFPs, does the control panel display a Service Error message, such as
49.XXXX, 79.XXXX or 8X.XXXX error?
●
Refer to your printer manuals to interpret the error message.
●
If you upgraded the Jetdirect firmware recently, power the print server off/on. For internal
Jetdirect cards, turn the printer off and back on again.
●
Reinstall the HP Jetdirect print server to ensure it is installed correctly, and verify all
connectors are fully mated.
●
If possible, print an HP Jetdirect configuration page and verify all configuration parameters.
To interpret HP Jetdirect configuration page messages, see
HP Jetdirect Configuration Pages
.
●
If your printer contains multiple EIO slots, try using a different slot.
●
Turn off the printer, remove the HP Jetdirect print server, and turn the printer back on. If the
error message disappears when the print server is removed, it is likely that the print server
was causing the error. Replace the print server.
●
Record all error codes and contact your service provider. If you need to replace the HP
Jetdirect print server under warranty service, include all diagnostic and configuration pages
with the faulty print server.
2
Does
EIOX INITIALIZING/DO NOT POWER OFF
appear on the display?
Wait for ten minutes to see if it clears. If it does not, you may need to replace the HP Jetdirect
print server.
ENWW
General Troubleshooting
115
Содержание 635n
