Access Control
Use this tab to display the Access Control List (ACL) on the HP Jetdirect print server. An access
control list (or host access list) specifies individual host systems, or networks of host systems, that
will be allowed to access the print server and the attached network device. Up to 10 entries can be
included on the list. If the list is empty (no hosts are listed), any supported system can access the
print server.
CAUTION
Use caution when using this feature. You may lose your ability to communicate
with the HP Jetdirect print server if your system is not properly specified in the list, or access
through HTTP is disabled.
For use of the host access list as a security feature, see
Security Features
.
NOTE
By default, hosts with HTTP connections (for example, through the embedded Web
server or IPP—the Internet Printing Protocol) are allowed access to the print server regardless
of access control list entries.
To disable access by HTTP hosts, clear the
Allow Web Server (HTTP) access
checkbox at
the bottom of the list.
Host systems are specified by their IP addresses or network number. If the network contains
subnets, an address mask may be used to identify whether the IP address designates an individual
host system or a group of host systems.
Examples
. See the table of sample entries below:
IP Address
Mask
Description
192.0.0.0
255.0.0.0
Allow all hosts with network number 192.
192.1.0.0
255.1.0.0
Allow all hosts on network 192, subnet 1.
192.168.1.2
Allow the host with IP address 192.168.1.2. The mask
255.255.255.255 is assumed and is not required.
To add an entry into the access control list, use the
IP Address
and
Mask
fields to specify a host,
and click (check) the
Save
checkbox for that entry. Then click
Apply
.
To delete an entry from the list, clear the
Save
checkbox for that entry. Then click
Apply
.
To clear the entire access control list, clear all
Save
checkboxes, and click
Apply
.
Mgmt. Protocols
This link provides access to management communications and other protocols that affect security.
Web Mgmt.
Use this tab to manage communications with the embedded Web server from Web browsers. This
tab appears only for full-featured print servers.
Secure, encrypted Web-based communication is provided through the Secure HTTP (HTTPS)
protocol. If configured to require HTTPS, the embedded Web server routes HTTPS communications
through port 443, the well-known port for HTTPS traffic. Although ports 80, 280, or 631 continue for
90
Chapter 4 HP Jetdirect Embedded Web Server (V.31.xx)
ENWW
Содержание 635n
