ipsec-config
Use this command to disable IPsec, if it is enabled on the print server. IPsec cannot be
enabled by this command; if IPsec is enabled, its status will be “read only”.
0: Disable IPsec, if it is enabled.
1: (Read Only) Indicates IPsec is enabled. Use the embedded Web server to enable
IPsec.
ip
IP address for the print server, in dotted notation. For example:
ip-config manual ip 192.168.45.39
where
ip-config
specifies manual configuration and
ip
manually sets the IP address
192.168.45.39 on the print server.
Specifying 0.0.0.0 clears the IP address.
If you exit and save a new IP address, it must be specified on the next Telnet connection.
subnet-mask
A value (in dotted notation) that identifies the network and host portions of an IP
address in received messages. For example,
subnet-mask 255.255.255.0
stores the subnet mask value 255.255.255.0 on the print server. The value 0.0.0.0
disables the subnet mask.
default-gw
The IP address of a default gateway, in dotted notation. For example,
default-gw 192.168.40.1
assigns 192.168.40.1 as the IP address of the default gateway for the print server.
NOTE
If the HP Jetdirect print server is configured by DHCP and you
manually change the subnet mask or the default gateway address, you should
manually change the print server's IP address. This will release the DHCP-
assigned address back to the DHCP IP address pool.
Config Server
(Read-only parameter) The IP address of the server (such as a BOOTP or DHCP
server) that last configured the IP address on the HP Jetdirect print server.
TFTP Server
(Read-only parameter) The IP address of the TFTP server that provided TFTP
parameters to the HP Jetdirect print server.
TFTP Filename
(Read-only parameter) The path and TFTP filename on the TFTP server. For example,
hpnp/printer1.cfg
domain-name
The domain name for the device. For example,
domain-name support.hp.com
assigns
support.hp.com
as the domain name.
The domain name does not include the host name; it is not the Fully Qualified Domain
Name (such as printer1.support.hp.com).
pri-dns-svr
IP address of the primary DNS (Domain Name System) server.
sec-dns-svr
IP address of a secondary DNS server to use if the primary DNS server is unavailable.
pri-wins-svr
The IP address of the primary Windows Internet Naming Service (WINS) server, in
dotted notation.
sec-wins-svr
The IP address of the secondary Windows Internet Naming Service (WINS) server, in
dotted notation.
Table 3-3
Telnet Commands and Parameters (continued)
ENWW
IPv4 Configuration
47
Содержание 635n
