Creating and Exporting Test Volumes
For more information about the commands used in this section, see the HP 3PAR OS Command
Line Interface Reference.
To create and export test volumes:
1.
In the CLI, create a common provisioning group test to verify the system can create and export
virtual volumes.
192.168.46.249 cli% createcpg test_cpg
2.
Create a virtual volume.
192.168.46.249 cli% createvv <usr_CPG> test0 256
3.
Create a VLUN of the virtual volume for export to the host.
192.168.46.249 cli% createvlun test0 0 <hostname>
4.
Verify that the host can access the VLUN.
5.
Repeat steps 1 through 4 for each host.
6.
From the SP, type
exit
to stop the CLI session, then type
x
and press
ENTER
to return to the
SP main menu. Type
x
and press
ENTER
again to exit. Type
exit
and press
ENTER
to log off
the SP. Disconnect the cables between the SP and the maintenance PC.
Exporting Test LUNs
65
