8.
Press
ENTER
to accept the default subnet mask or type an alternate subnet mask for the SP
and press
ENTER
.
Please enter the netmask for this interface [255.255.255.0]:
<subnet.mask.address>
9.
Press
ENTER
to accept the default gateway address shown in brackets, or type a default
gateway address and press
ENTER
. The setup script suggests a default gateway address based
on the IP address you have supplied.
Please enter the IP address of a default gateway, or NONE [<static.IP.address.1>]:
<default.gateway.address>
10. Press
ENTER
to indicate the Ethernet interface is used for file transfers.
Will this ethernet interface be used for inbound and/or
outbound file transfers (yes or no)? [no]
11. Type
no
to indicate the SP shall not be remotely controlled.
SP Network Parameters
Enter Control-C at any time to abort this process
Will this SP be allowed to be remotely controlled(yes or no)? [yes]
(Replying 'yes' will allow Remote Operations sessions from a Connection
Portal)
no
12. Press
ENTER
or type
no
if the SP shall use the 3PAR Connection Portal.
SP Network Parameters
Enter Control-C at any time to abort this process
Will this SP use the 3PAR Connection Portal? ( yes or no ) [no]
13. Answer the prompts about your proxy system.
SP Network Parameters
Enter Control-C at any time to abort this process
Does the connection to the CP require proxy services? (yes or no) [no]
no
Please enter the name of the proxy system
-OR-
quit to abort setting a proxy
<proxy.system.name>
Please enter the IP address of the proxy system
-OR-
quit to abort setting a proxy
<proxy.system.address>
Please enter the protocol supported by the proxy system from the list
HTTP
58
Installing Storage Software Manually
