You have two options for file transfer/remote operations:
1 ==> SP Mode where inbound/outbound access is via ssh session and control
is via the Customer Controlled Access (CCA) setting.
2 ==> Secure Network Mode where inbound/outbound access is via https and
is controlled by the 3PAR Secure Service Agent (SSAgent).
X None of the above. Cancel and Exit
Please enter your selection [X]:
2
5.
Type
1
and press
ENTER
to continue with the new installation.
Type of install
Enter Control-C at any time to abort this process
How do you want to configure this SP?
1 ==> Continue with spmob ( new site install )
2 ==> Restore from a backup file ( SP rebuild/replacement )
X None of the above. Cancel and Exit
1
6.
Type the domain name for the SSAgent and press
ENTER
.
SP Network Parameters
Enter Control-C at any time to abort this process
Please enter the domain name for this SSAgent [?]:
Domain Name or <static.IP.address>
7.
Press
ENTER
to accept the default SP name (in brackets) or type an alternate name and press
ENTER
. The default SP name is the SP serial number. HP recommends accepting this default.
SP Network Parameters
Enter Control-C at any time to abort this process
Valid characters are [a-z] [A-Z] [0-9] dash(-) underscore(_)
Please enter the host name [SPXXXXX] :
[enter]
8.
Type the static IP address assigned to the SP and press
ENTER
.
SP Network Parameters
Enter Control-C at any time to abort this process
Please enter the IP address for the public network interface:
<static.IP.address>
Manually Setting up the Service Processor
43
