HP 3PAR StoreServ 7000 Скачать руководство пользователя страница 20

Страница: 20 / 204

To view a list of users, the user roles, and user domain associations, issue the

showuser

command.

For more information about the

showuser

command, see the HP 3PAR Command Line Interface

Reference.

•

To display all the users of a system, issue the

showuser

command.

•

To display information for a specific user, issue the

showuser <user_name>

command,

where

<user_name>

is the name of the user.

Removing Users

Removing a user permanently deletes the user account from the system.

To remove a user from the system, issue the

removeuser <user_name>

command, where

<user_name>

is the name of the user.

Adding Users to a Domain

To add a user to an existing domain, issue the

setuser -adddomain <domain_name>:<role>

<user_name>

command, where:

•

<domain_name>

is the name of the domain to which you are adding the specified user.

•

<role>

is the role assigned to the user. Permitted values for

<role>

are

browse

and

edit

•

<user_name>

is the name of the user being added to the specified domain.

NOTE:

A user can belong to a maximum of 32 domains. For additional details about domains,

see the HP 3PAR StoreServ Storage Concepts Guide.

Removing Users From a Domain

To remove a user from a domain, issue the

setuser -rmdomain <domain_name>

<user_name>

command, where:

•

<domain_name>

is the name of the domain from which the specified user is being removed.

•

<user_name>

is the name of the user being removed from the specified domain. You can

specify

all

in place of a specific domain name to remove the user from all domains.

Setting a User’s Default Domain

A user’s default domain is the domain that the user will access upon each working CLI session.

NOTE:

Prior to setting a specific domain as a user’s default, the user must previously have been

assigned accessibility within that domain.

To set a user’s default domain, issue the

setuser -defaultdomain <domain_name>

<user_name>

command, where:

•

<domain_name>

is the name of the domain which is being set as the default.

•

<user_name>

is the name of the user for whom you are assigning a default domain.

For information about default domains, see the HP StoreServ Storage Concepts Guide. For detailed
information about the

setuser

command, see the HP 3PAR Command Line Interface Reference.

Removing a User’s Default Domain

To remove a user’s default domain, issue the

setuser -defaultdomain -unset

<user_name>

command, where

<user_name>

is the name of the user for whom you are removing

a default domain.

Managing User Accounts and Connections

Содержание 3PAR StoreServ 7000













































































































































































































Результаты поиска

Содержание 3PAR StoreServ 7000

Отзывы:

Похожие инструкции для 3PAR StoreServ 7000

Бренды по названию

Популярные бренды

HP 3PAR StoreServ 7000, Руководство администратора

Результаты поиска

Содержание 3PAR StoreServ 7000

Отзывы:

Похожие инструкции для 3PAR StoreServ 7000

Бренды по названию

Популярные бренды