Hoval RoofVent CON-9 Скачать руководство пользователя страница 7

Страница: 7 / 280

1 Symbols

Caution

This symbol warns against risks of injury. Please heed

all instructions designated by this symbol to prevent

injuries and/or death.

Attention

This symbol warns against risks of property damage.

Please heed the respective instructions to prevent

risk of damage to the unit and its functions.

Note

This symbol denotes information about the economic

use of the equipment or special tips.

2 Operational Safety

RoofVent

units are state of the art design and are safe

to operate. Nevertheless, hazards may emanate from the

units if they are used incorrectly or not used as intended.

Therefore:

■

Please read the operating instructions before unpacking,

installing, commissioning and before maintaining the

equipment.

■

Store the operating instructions so that they are easily

accessible.

■

Observe all appropriate informational and warning signs.

■

Follow the local safety and accident prevention regula-

tions at all times.

■

RoofVent

units may only be installed, operated and main-

tained by authorized, skilled and trained specialists.

Specialists as defined by these operating instructions are

those persons who, based on their training, knowledge

and experience as well as their knowledge of the rele-

vant regulations and guidelines, can carry out the work

assigned to them and recognize potential hazards.

3 Information for a User Manual

According to the accident prevention regulations of some

countries, the operator of equipment must meet certain

requirements for the prevention of occupational accidents

and instruct the operating personnel as to the hazards that

may occur and how to prevent them. This can be done with

the help of the user manual.

In addition to national regulations for accident prevention and

environmental protection, a user manual should also include

the most important items of the operating instructions.

Safety

Symbols

Содержание RoofVent CON-9

























































































































































































































































































Результаты поиска

Содержание RoofVent CON-9

Отзывы:

Hoval RoofVent CON-9, Руководство по конструкции, Страница: 7 / 280

Результаты поиска

Содержание RoofVent CON-9

Отзывы: