3. Operation
InfoDisplay (Boiler control)
The following
operating modes are available:
- OFF
- ON (incl. self-test, illumination ON, illumination OFF)
- Pellet feed
- Manual operation
- Chimney sweep function
- Shut down process
The following
operating phases are
available
:
- Standby
- Pre-purge
- Ignition phase
- Flame stabilisation
- Modulated control
- Burnout
- Burner OFF
- Switch off heat generator (WE)
No adjustments to the boiler control are normally required by the user. All the necessary adjust-
ments were conducted by the installer or by the manufacturer.
The InfoDisplay consists of a generously sized full-text display, an On/Off key with a control light (LED) indicat-
ing normal operation (green) and fault (red), a key for the manual/chimney sweep function, and 4 individually
used menu keys. The individual function on the menu keys is displayed on the menu bar.
Note: If the readout on the display shifts its position, this will be corrected at the next automatic refresh af-
ter about 30 minutes. This shift in position or distortion can be caused, for example, by an electromagnetic
discharge or similar.
Menu keys
On/Off key
Control light (LED)
“Normal operation”
green, and “Fault” red
Full-text display
(Illuminated
display)
Manual operation
/ Chimney sweep
function
Assignment of keys to
the individual function
The different ope-
rating phases are
shown here, e.g.
Standby, Burner
Menu bar
The different operating modes are displayed on the InfoDisplay, together with the corresponding operating
phase.
Boiler temperature
Operating phases
Lighting ON
Fig. 7
1
4 204 827 / 02
