3. Operation
Press the
Manual operation/Chimney-sweep
key to turn on the il-
lumination. Press the key again to start the chimney sweep function
(Fig. 18). The boiler temperature is regulated to approx. 60°C.
Note:
To ensure that heat dissipation is taking place, press the
“Emission Measurement” key on the TopTronic
®
T control!
Press the individual menu keys to run the boiler at 30% or at 100%
output (Fig. 19). The illumination is turned off after the time defined
by the illumination timer (45 sec.), while the function or display re-
main unchanged. The illumination is turned on every time you press
a key.
The chimney sweep function ends,
- when the
Cancel
key or the
Manual operation/Chimney-sweep
key
is pressed (Fig. 20).
- automatically after approx. 45 minutes
3.5. Shut down process
The boiler is turned off (Fig. 21).
3.5. Chimney sweep functions
This function is used to conduct the statutory emission measurements.
5s
RESET
5s
RESET
5s
RESET
5s
RESET
Fig. 20
Fig. 21
Fig. 18
Fig. 19
The different operating phases are shown
here, e.g. burner in operation, burner
OFF, etc.
The green LED flashes
Chimney sweep function
Output 30%
(Operating phases)
Cancel
Chimney sweep function
Output 100%
(Operating phases)
Cancel
Chimney sweep function
Output 30%
(Operating phases)
Cancel
Shut down process
Burnout
1
4 204 827 / 02
