The
factory setting in the menu item “Feed operating mode” is “
feed off”.
no time control:
Select this option when the feed noise (vacuum tur-
bine) is not audible from the living area or if it is not bothersome.
This operating mode guarantees the smallest feed frequency
because the storage container is not refilled until it is completely
empty.
Functional description:
The pellet feed is turned on automati-
cally at any time when the storage container runs empty (Fig.
62).
with start time:
Select this option to start feed every day at a spe-
cific time.
Functional description:
The storage container is filled every
day at the predefined time (see page 31). If the storage container
does not contain sufficient to last 24 hours, it will also be refilled
in between.
with enable time:
Select this option when the feed noise (vacuum
turbine) is audible from the living area, or if it is bothersome.
Functional description:
The pellet feed is enabled at a pre-se-
lected time (see page 29). The storage container is refilled auto-
matically again at the end of the enable time.
Tip: About 50 kg of pellets are sucked at each complete fill. Make
sure that the pellet demand does not exceed this value while the
pellet feed is disabled!
Combustion time of 50 kg pellets
BioLyt
Combustion time at rated power
BL 10
19 hours
BL 15
14 hours
BL 21
10 hours
BL 26
8 hours
Only one menu item can be selected each time. It is pos-
sible to adjust the “Feed time profile” in sect. 3..1.3 for
the selected menu item.
Select the desired sub-item using the
Arrow
keys (Fig. 62).
Press on the
Yes
key to save the modified feed operating mode (Fig.
63). The message “Storing parameter value” appears for a few sec-
onds (Fig. 64) before moving back to the previous level (Fig. 65).
You can leave this submenu or sub-item by pressing the
Back
key
(Fig. 65) or waiting 45 seconds.
5s
RESET
5s
RESET
5s
RESET
3. Operation
5s
RESET
Fig. 65
Fig. 64
Fig. 63
Fig. 62
Feed operating mode
with enable time
with start time
feed off
save
yes
no
Feed operating mode
with enable time
with start time
feed off
save
Storing parameter
value
select
back
Time
Feed operating mode
Feed time profile
Suction head changeover
-
yes
no
+
-
yes
no
+
4 204 827 / 02
