horsch 24591253, Руководство пользователя

Страница: 38 / 68

33
Vacuum adjustment
E-Manager in the crop parameter menu.
Depending on grain shape, weight, metering
disk and application conditions, changes will be
required.
As a rule of thumb the required vacuum level
needs to be adjusted higher for smaller metering
disc holes / slots than for bigger ones.
set as low as possible.
only becomes apparent by testing.
Overview of metering disks
Seed
Metering disk
part number
hole/slot (mm)
Corn 95100486 4.0
Corn 24018931 5.0
Corn 24018910 5.0 chamfer
2401893 4 2.0
2401893 5 2.5
2401893 6 2.25
240189 39 2.75
Sorghum 95120752 2.0
Sorghum 95120753 2.5
Sorghum 95120754 2.8
Sugar Beet 95100642 3.0
Soybean 95110502 64 x 4.0
Soybean 95120602 96 x 4.0
Wear and inspection of metering disks
Damaged or worn metering discs and parts must
be replaced immediately.
Defective parts can be recognized by:

Uneven disks or bent teeth (1)

Formation of burrs or grooves (2)

Rounded or broken out edges (3)

Non-circular holes (4)
Defective metering disk
Sunflower
Sunflower
Sunflower
Sunflower
(1)
(2)
(3)
(4)
For sunflowers the vacuum must always be
See Maestro SW Parts Catalog for further metering disk
options and kits.