horsch 24591253, Руководство пользователя

Страница: 21 / 68

16
Changing components

Secure the machine against unintended
rolling!

Secure lifted frame parts, under which you will
be working, with suitable supports!

Caution! Danger of injury caused by protrud-
ing parts!

Do not use wheels or other rotating parts
to climb onto the machine. These could start
to rotate and you could fall and be seriously
injured.
In Operation

Check the area around the machine (for chil-

Do not remove any of the mandatory and
supplied protective devices.

Stay clear of the operating range of hydrauli-
cally operated parts.

Only use ascending aids and steps when ma-
chine is at standstill. Passengers are not al-
lowed to ride on the machine during operation!
Do not reverse with the machine low-
ered. The components have only been
and may be damaged when reversing.
Service and Maintenance

Ensure that regular tests and inspections are
in the operating instructions.

Prior to performing maintenance and servicing
work, ensure that the machine is positioned
secured against rolling away.

De-pressurize the hydraulic system and lower
or support the implement.

Before cleaning the machine with high pres-
sure cleaning equipment cover all openings,
which should stay clear of water, steam or
cleaning agents for reasons of safety or op-
eration. Do not aim the water jet directly at
electrical or electronic components, bearings
or the fan.

After cleaning, check all hydraulic lines for
leaks and loose connections.

damage. Remedy any faults immediately!

Prior to working on the electrical system,
disconnect it from the electric power supply.

When performing welding work on the ma-
chine, disconnect the cables from computers
and other electronic components. The ground
connection must be as close as possible to
the welding point.

When cleaning with high pressure or steam
cleaning equipment keep a distance of at least
2 ft. to machine components.

Re-tighten screwed connections which have
been loosened during servicing and mainte-
nance work.
Do not wash new machines with a
steam-jet or high-pressure cleaner. The
paint takes approx. 3 months to cure
and could thus be damaged if this time
has not yet expired.