49
Gauge Wheels
During planting the gauge wheels must
rest against the opening disks.
The position of the wheels to the disks
can be changed, if required.
If the disks are adjusted closer to each
other because of wear, the gauge
wheels must also be adjusted.
1
3
4
4
2
Change the assembly sequence of the
shims (2) accordingly.
To move the wheel in remove a shim from
the inside of the wheel and place it on the
outside.
Mount the wheel and secure it again with the
screw (1).
If the depth guidance wheels require further
adjustment, unscrew the screw (3) and change
the sequence of the shims (4) accordingly.
Maintenance
Check the gauge wheels every day
The inner running face must touch the
disks. Adjust as required.
Lubricate both grease zerks once every
week.
Check the setting of the placement depth
every day.
Closing Wheels
The closing wheels close the seed trench
and press the soil against the seed.
With the adjustment lever the consolidation
effect of the closing wheels can be matched to
soil conditions and planting depth.
Adjusting the closing wheels
Adjusting the consolidation
Slightly lift the machine.
Pull the adjustment lever back out of the
locking gate and engage it in the new position;
Moving the lever backwards increases
the consolidation.
Set the spring pre-tension equally on
all drill units.
Check the down pressure and the seed
placement with every change to the closing
wheels. Any change of setting can affect
the seed placement.
Maintenance
Check the wheels every day for damage and
free rotation.
Содержание 24591253
