manualshive.com logo in svg

horiba APMA-370, Руководство по эксплуатации

Поделиться
Скачать
horiba APMA-370 Скачать руководство пользователя страница 78

6 FUNCTIONALITIES

66

Changing the machine ID

1.

Press the MACHINE ID button.

The MACHINE ID screen will be displayed.

Fig. 84  MACHINE ID screen

The currently set machine ID is displayed in parentheses below the edit box.
Use the numeric keypad to enter a value in the following range:

The keys allow you to perform the following operations.

2.

Use the numeric keypad to enter a desired value.

3.

Press the [SET] key. You will return to the MACHINE ID SETTING screen.

At this stage, the changed setting is not reflected. For the reflection of the setting, see " 

Reflecting the machine ID setting" (page 67).

[Setting range]: 0 to 255

[CANCEL]: Returns to the MACHINE ID SETTING screen without changing the setting.
[CLEAR]:

Deletes the value entered in the edit box.

[BACK]:

Deletes the previously entered value (1-digit).

[SET]:

Establishes the changed value and then returns to the MACHINE ID
SETTING screen.

Содержание APMA-370












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды