manualshive.com logo in svg

horiba APMA-370, Руководство по эксплуатации

Поделиться
Скачать
horiba APMA-370 Скачать руководство пользователя страница 71

6 FUNCTIONALITIES

59

Setting the time for automatic backlight OFF

1.

Press the button of the time for automatic backlight OFF. The BACK LIGHT TIME
PERIOD screen will be displayed.

Fig. 74  BACK LIGHT TIME PERIOD screen

The time is set by choosing a button of time setting.
The keys allow you to perform the following operations.

2.

Press the button of the time to be set.

3.

Press the [SET] key. The time setting for automatic backlight OFF will be changed
and the LCD SETTING screen is displayed again.

Controlling the LCD brightness

Use the following button to control the LCD brightness.

[CANCEL]: Returns to the LCD SETTING screen without changing the settings.
[SET]:

Returns to the LCD SETTING screen with the settings changed.

[

]:

Decreases the brightness level of the screen.

[

]:

Increases the brightness level of the screen.

Содержание APMA-370












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды